Create the Bootable Windows 7 USB Flash Drive and Drive Bootable

Hi Friends in this post we can learn how to create bootable usb in windows 7 .


Follow the Steps Below :-


Step 1 :-


1) Plug in your USB Flash Drive
2) Open a command prompt as administrator (Right click on Start > All Programs > Accessories > Command Prompt and select “Run as administrator”
3) Find the drive number of your USB Drive by typing the following into the Command Prompt window:diskpart list disk.The number of your USB drive will listed. You’ll need this for the next step. I’ll assume that the USB flash drive is disk 1.
4) Format the drive by typing the next instructions into the same window. Replace the number “1” with the number of your disk below.
      select disk 1
      clean
      create partition primary
      select partition 1
      active
      format fs=NTFS
      assign
      exit
When that is done you’ll have a formatted USB flash drive ready to be made bootable.


Step 2: -


Make the Drive Bootable 


Next we’ll use the bootsect utility that comes on the Vista or Windows 7 disk to make the flash drive bootable.  In the same command window that you were using in Step 1:


1. Insert your Windows Vista / 7 DVD into your drive.
2. Change directory to the DVD’s boot directory where bootsect lives:
      d:
      cd d:\boot
3. Use bootsect to set the USB as a bootable NTFS drive prepared for a Vista/7 image. I’m assuming that your USB flash drive has been labeled disk G:\ by the computer:
      bootsect /nt60 g:
4. You can now close the command prompt window, we’re done here.


Step 3:


Copy the installation DVD to the USB drive


The easiest way is to use Windows explorer to copy all of the files on your DVD on to the formatted flash drive.  After you’ve copied all of the files the disk you are ready to go.


Step 4: 


Set your BIOS to boot from USB


This is where you’re on your own since every computer is different. Most BIOS’s allow you to hit a key at boot and select a boot option.


or

USING THE WINDOWS 7 USB/DVD DOWNLOAD TOOL

Before you run the Windows 7 USB/DVD Download Tool, make sure you have already purchased the Windows 7 ISO download from Microsoft Store and have downloaded the Windows 7 ISO file to your hard drive. If you have purchased Windows 7 but have not yet downloaded the ISO file, you can download the file from your Microsoft Store Account.

TO MAKE A COPY OF YOUR WINDOWS 7 ISO FILE: 

1. Click the Windows START button, and click WINDOWS 7 USB/DVD DOWNLOAD TOOL in the ALL PROGRAMS list to open the Windows 7 USB/DVD Download Tool.
2. In the SOURCE FILE box, type the name and path of your Windows 7 ISO file, or click BROWSE and select the file from the OPEN dialog box. Click NEXT.
3. Select USB DEVICE to create a copy on a USB flash drive or select DVD disk to create a copy on a DVD disk.
4. If you are copying the file to a USB flash drive, select your USB device in the drop-down list and click BEGIN COPYING. If you are copying the file up to a DVD, click BEGIN BURNING.

When your Windows 7 ISO file is copied onto your chosen media, install Windows 7 by moving to the root folder of your DVD or USB flash drive, and then double-click Setup.exe.

Click to download the Windows 7 USB/DVD Download tool  .

Thats it Thanku For Visiting .